How to Protect Stairs Surface During Renovation?

How to Protect the Surface of Stairs

A large part of our customers' needs is how to protect their stairs during renovation and refurbishment. As a professional provider of surface protection, we will share our experience and methods of stair protection through this article.

Dealing with Different Types of Stairs

The vast majority of our customers have stairs made of hardwood, and some have stairs made of materials such as Marble or Tile as the surface of the steps. The surface protection that can be used as stairs must require a certain thickness, be non-slip, waterproof, and easy to cut and fix. If you say, before you know our products, you may need to consider different types of stair surface for targeted selection of surface protection, but with us, everything becomes simple, thanks to the use of the latest three-layer composite technology, not only waterproof and non-slip, and provide strong wear resistance, so much so that our basic model surface protection is sufficient to deal with a variety of materials stairs.

Stair Surface Protection Prep

Once you have purchased a surface protection for your stairs, in addition to the necessary tools such as cutting knives and tape, we recommend that you use discarded wooden strips to create a tool the width of the stairs to help you align the surface protection better and secure it neatly.

Start Installing the Stair Surface Protection

Once the appropriate preparations have been made, the installation of the stair surface protection can begin. The stair surface protection is usually applied after the installation of the stair table. Therefore, before the paste, you need to make sure that the surface of each step of the stairs has been installed with the corresponding plate, such as wood, stainless steel, etc.. After the stairs need to be a clean, clean the surface of the dust, so as to prevent the paste surface protection, surface protection adhesive is not strong, affecting the protection effect.

After the surface of the stairs to complete the cleaning, you need to pave the stairs, in the paving, you need to follow a certain order. According to the direction of the stairs from top to bottom of the paving, and then each level is from left to right for paving. This decoration staircase surface protection protection effect will be better, and in the laying of the staircase surface protection, to use professional Duct Tape, if the use of ordinary transparent adhesive, when laying, be careful not to let it stick to the staircase surface, otherwise it will be difficult to clean later, you need to ask someone to clean up increased cost costs.

Special Attention

After pasting the staircase surface protection, be sure to double-check whether it has been fixed firmly, if there is a warped place, it is recommended to tear off the surface of the tape, and the staircase surface for cleaning, and then re-fixed with a brand new tape.

During the long construction period, the staircase surface protection device will certainly have more dust and other liquids, please make sure to clean it in time to prevent the construction workers from accidentally slipping and causing unnecessary safety accidents.

Stair corners and entrances are the most easily damaged, so it is recommended to lay and reinforce the stair surface protection in multiple layers if conditions allow, in order to make the stair surface protection stick to longer protection time.

Reading next

Showcase Your Company with Custom Temporary Floor Protection
7 Ways to Protect Flooring During Construction and Renovation (2022)

Leave a comment

All comments are moderated before being published.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.